AAIB: The EC135 Fenestron Blade That Broke Off G-WPDA Had a Fatigue Crack With Dye-Penetrant on It

G-WPDA's EC135 fenestron blade failed through a fatigue crack with dye-penetrant on it, the AAIB says, as FAA AD 2026-22-10 mandates blade checks.

Published: November 16, 2026 14:25 UTC by AeroCorner News

Add AeroCorner as a preferred source on Google
Yellow Eurocopter EC135 P1 G-WPDA in flight with Electricity livery
G-WPDA, the powerline inspection EC135 P1 whose tail rotor blade separated in November 2025, seen in flight in an earlier year. – © Alec Wilson

Get the Newsletter

The latest aviation news and stories sent to your inbox.

The tail rotor blade that separated from EC135 P1 helicopter G-WPDA over Monmouthshire, Wales, a year ago failed through a fatigue crack, and dye-penetrant was found on the crack surfaces. The UK Air Accidents Investigation Branch (AAIB) said so in an anniversary statement published on November 16, 2026.

The finding lands a week after the FAA published AD 2026-22-10, which makes Europe’s latest tail rotor blade crack inspections mandatory for 359 US-registered EC135 helicopters from December 14, 2026.

What the AAIB found

G-WPDA was flying a powerline inspection on November 16, 2025, when one of its fenestron blades separated and passed through the fenestron shroud, the AAIB said. The pilot kept control and landed safely in a field near Dingestow.

Experts at a forensic organization and at Airbus Helicopters examined the fracture surfaces separately. Both examinations showed a fatigue failure, with dye-penetrant on the crack surfaces.

The statement does not say when that penetrant was applied, how far the crack had grown at that point, or which blade part number G-WPDA carried. The investigation is ongoing, and the AAIB says a final report will follow.

The AAIB’s statement lists three documents issued since the accident: Airbus Helicopters’ Emergency Alert Service Bulletin EC135-64-11-0001 Issue 3 of February 5, 2026, on inspecting the tail rotor blades for cracks; EASA AD 2026-0032 of February 19, 2026; and the FAA’s AD 2026-22-10 of November 9, 2026.

Why dye-penetrant matters here

A dye-penetrant inspection works by capillary action. A colored liquid soaks into any crack that is open to the surface, the excess is wiped off, and a developer draws the dye back out so the crack shows up to the inspector.

The method is also central to the new rules. The FAA says Airbus determined that inspection Method A, a dye-penetrant check “with increased temperature”, should be discontinued, and EASA’s AD bars it from March 5, 2026.

EASA also limits the follow-up. A fluorescent penetrant inspection is allowed only on a blade that has never had a dye-penetrant check, or that has had an eddy current inspection since its last one.

The FAA’s AD goes further on method. It points operators to an FAA bulletin, SAIB CE-18-26R1, which warns of the risks of visible-dye inspections on critical parts, stresses cleaning before and after an inspection so cracks are detected properly, and notes that industry standard ASTM E1417 prohibits a visible-dye check before a fluorescent one on the same surface.

What AD 2026-22-10 requires

The FAA rule covers all EC135P1, P2, P2+, P3, T1, T2, T2+, T3 and EC635T2+ helicopters and replaces AD 2024-04-10. It adopts EASA AD 2026-0032, which targets tail rotor blade assemblies part numbers L642A2002111 and L642A2002112.

The first check is due before a blade reaches 685 hours time-in-service since first installation, or within 10 hours after March 19, 2024, whichever is later. Repeat intervals depend on the model and on how the blade was last inspected.

ModelsPenetrant or eddy current checkVisual check (Method E)
EC135 P1, P2, P2+, T1, T2, T2+ and EC635 T2+Every 30 hoursEvery 7.5 hours
EC135 P3 and T3Every 20 hoursEvery 5 hours
Repeat inspection intervals from EASA AD 2026-0032, adopted by FAA AD 2026-22-10. Flight hours in the EASA AD are hours time-in-service in the US.

For US operators the FAA sets the method by a blade’s history. A blade already checked with visible dye gets visible dye (Method B) or eddy current, one never checked that way gets eddy current or fluorescent penetrant, and a blade with an unknown history must be cleaned first, then checked by eddy current or fluorescent penetrant.

A cracked blade must be replaced before the next flight, and special flight permits are not allowed. Replacing every affected blade with an eligible assembly of a different part number ends the repeat inspections.

The FAA estimates each inspection at three work-hours and $50 in parts, up to $305, or up to $109,495 across the US fleet. A replacement blade assembly costs $4,900 in parts, and replacing all 10 on one helicopter would run up to $51,550.

The FAA received no comments on its July 30 proposal.

A separate EASA directive issued the same day, AD 2026-0031, covers a third blade assembly, part number L642A2002121. It is not part of the FAA rule.

A tail rotor inside a duct

A fenestron is Airbus Helicopters’ enclosed tail rotor: a ring of blades spinning inside a duct in the tail, countering the torque of the main rotor, the job that lets a pilot hold and turn the heading. The duct shields the blades from collision damage and people on the ground from the spinning rotor, and on G-WPDA the separated blade went through it.

The blade inspections are not new. EASA first required them in January 2024, after increased tail rotor vibration on one helicopter led to the discovery of a ruptured blade assembly. Investigators found the affected blades can be subject to intergranular corrosion that may lead to cracks.

The EC135, now sold as the H135, is a staple of air ambulance and police fleets. Airbus says the family has passed 1,600 deliveries to more than 325 operators, including more than 700 dedicated air ambulances, and calls it the fleet leader in law enforcement.

In October, the FAA also ordered repeat rescue hoist cable drum inspections on EC135, EC635 and BK117 helicopters.

Get the Newsletter

The latest aviation news and stories sent to your inbox.

About the Author

AeroCorner News

AeroCorner News is the aviation news desk of AeroCorner.com. It covers accidents and incidents, safety rulings, airline and airport disruption, and new aircraft. It works from primary sources such as the NTSB, FAA, EASA and the manufacturers' own announcements.